4,031 research outputs found
COURSE DESIGN…ONLINE: HELPING STUDENTS PERFORM IN THE DIGITAL AGE
The current study sought to test the relationship between course design, as described by the rubric produced by Quality Matters, and online university student performance. Due to the link between student motivation and active learning behaviors, and thus performance, it was predicted that the better-designed courses would facilitate student motivation. It was also predicted that goal orientation would moderate this relationship. While a significant relationship was observed between student motivation and course performance, no relationship was observed between course quality, as measured by the QM Rubric, and motivation, or performance. Only slight evidence was found for a moderating effect of goal orientation
Effect of Surgical Fusion on Volitional Weight-Shifting in Individuals With Adolescent Idiopathic Scoliosis
Study Design Prospective. Objectives The goals of this study were to (1) evaluate the differences in weightbearing symmetry between individuals with adolescent idiopathic scoliosis (AIS) and typically developing controls; (2) observe the effect of posterior spinal fusion and instrumentation (PSFI) on volitional weight-shifting at 1 and 2 years postoperatively; and (3) evaluate whether lowest instrumented fusion level (ie, lowest instrumented vertebra [LIV]) in PSFI has an effect on volitional weight-shifting. Summary of Background Data Previous studies have conflicting findings with regard to the effect of scoliosis on postural control tasks as well as the effect of surgery. They have also noted an inconsistent effect of PSFI at different LIVs, with more distal LIVs exhibiting greater reductions in postoperative range of motion. Methods The study was designed with an AIS group of 41 patients (8 males and 33 females) with AIS who underwent PSFI, along with a Control Group of 24 age-matched typically developing participants (12 male and 12 female). Both groups performed postural control tasks (static balance and volitional weight-shifting), with the AIS group repeating the tasks at 1 and 2 years postoperatively. Results At baseline, the AIS group showed increased weightbearing asymmetry than the Control Group (p = .01). The AIS group showed improvements in volitional weight-shifting at 2 years over baseline (p \u3c .01). There was no effect of LIV on volitional weight-shifting by the second postoperative year. Conclusions Individuals with AIS have greater weightbearing asymmetry but improved volitional weight-shifting over typically developing controls. PSFI improves volitional weight-shifting beyond preoperative baseline but does not differ significantly by LIV
Effect of Surgical Fusion on Volitional Weight-Shifting in Individuals With Adolescent Idiopathic Scoliosis
Study Design Prospective. Objectives The goals of this study were to (1) evaluate the differences in weightbearing symmetry between individuals with adolescent idiopathic scoliosis (AIS) and typically developing controls; (2) observe the effect of posterior spinal fusion and instrumentation (PSFI) on volitional weight-shifting at 1 and 2 years postoperatively; and (3) evaluate whether lowest instrumented fusion level (ie, lowest instrumented vertebra [LIV]) in PSFI has an effect on volitional weight-shifting. Summary of Background Data Previous studies have conflicting findings with regard to the effect of scoliosis on postural control tasks as well as the effect of surgery. They have also noted an inconsistent effect of PSFI at different LIVs, with more distal LIVs exhibiting greater reductions in postoperative range of motion. Methods The study was designed with an AIS group of 41 patients (8 males and 33 females) with AIS who underwent PSFI, along with a Control Group of 24 age-matched typically developing participants (12 male and 12 female). Both groups performed postural control tasks (static balance and volitional weight-shifting), with the AIS group repeating the tasks at 1 and 2 years postoperatively. Results At baseline, the AIS group showed increased weightbearing asymmetry than the Control Group (p = .01). The AIS group showed improvements in volitional weight-shifting at 2 years over baseline (p \u3c .01). There was no effect of LIV on volitional weight-shifting by the second postoperative year. Conclusions Individuals with AIS have greater weightbearing asymmetry but improved volitional weight-shifting over typically developing controls. PSFI improves volitional weight-shifting beyond preoperative baseline but does not differ significantly by LIV
Effect of Lowest Instrumented Vertebra on Trunk Mobility in Patients With Adolescent Idiopathic Scoliosis Undergoing a Posterior Spinal Fusion
Study Design Prospective. Objectives The goal of this study was to evaluate the effect of posterior spinal fusion surgery terminating at different lowest instrumented vertebrae (LIV) on trunk mobility in individuals with adolescent idiopathic scoliosis (AIS). Summary of Background Data Posterior spinal fusion with instrumentation is the standard surgical technique employed in AIS for correcting spine deformities with Cobb angles exceeding 50°. Surgical correction of curve deformity reduces trunk mobility and range of motion. However, conflicting findings from previous studies investigating the impact of different LIV levels on the reduction in trunk mobility after surgery have been reported. Methods The study was designed as a prospective study with 47 patients (7 males and 40 females) with AIS who underwent posterior spinal fusion. Patients were classified into 5 groups based on their surgical LIV level (ie, T12, L1, L2, L3, and L4). Trunk flexion-extension (sagittal plane), lateral bending (coronal plane), and axial rotation (transverse plane) kinematics were assessed during preoperative, 1 year postoperative, and 2 years postoperative evaluation visits. Results There were postoperative reductions of 41%, 51%, and 59% in trunk range of motion in the sagittal, coronal, and transverse planes, respectively (p \u3c .0001). A trend toward greater postoperative reductions in peak forward flexion at more distal LIVs was observed (p = .04). Conclusions Fusion reduces trunk mobility in the sagittal, coronal, and transverse planes. More distal LIV fusions limit peak forward flexion to a greater extent which is considered clinically significant. After fusion, the reductions seen in axial rotation, lateral bending, and backward extension do not differ significantly at more distal LIVs
Effects of Spinal Fusion for Idiopathic Scoliosis on Lower Body Kinematics During Gait
Objectives The purpose of this study was to compare gait among patients with scoliosis undergoing posterior spinal fusion and instrumentation (PSFI) to typically developing subjects and determine if the location of the lowest instrumented vertebra impacted results. Summary of Background Data PSFI is the standard of care for correcting spine deformities, allowing the preservation of body equilibrium while maintaining as many mobile spinal segments as possible. The effect of surgery on joint motion distal to the spine must also be considered. Very few studies have addressed the effect of PSFI on activities such as walking and even fewer address how surgical choice of the lowest instrumented vertebra (LIV) influences possible motion reduction. Methods Individuals with scoliosis undergoing PSFI (n = 38) completed gait analysis preoperatively and at postoperative years 1 and 2 along with a control group (n = 24). Comparisons were made with the control group at each time point and between patients fused at L2 and above (L2+) versus L3 and below (L3–). Results The kinematic results of the AIS group showed some differences when compared to the Control Group, most notably decreased range of motion (ROM) in pelvic tilt and trunk lateral bending. When comparing the LIV groups, only minor differences were observed, and the results showed decreased coronal trunk and pelvis ROM at the one-year visit and decreased hip rotation ROM at the two-year visit in the L3– group. Conclusions Patients with AIS showed decreased ROM preoperatively with further decreases postoperatively. These changes remained relatively consistent following the two-year visit, indicating that most kinematic changes occurred in the first year following surgery. Limited functional differences between the two LIV groups may be due to the lack of full ROM used during normal gait, and future work could address tasks that use greater ROM
The Discovery of Cometary Activity in Near-Earth Asteroid (3552) Don Quixote
The near-Earth object (NEO) population, which mainly consists of fragments
from collisions between asteroids in the main asteroid belt, is thought to
include contributions from short-period comets as well. One of the most
promising NEO candidates for a cometary origin is near-Earth asteroid (3552)
Don Quixote, which has never been reported to show activity. Here we present
the discovery of cometary activity in Don Quixote based on thermal-infrared
observations made with the Spitzer Space Telescope in its 3.6 and 4.5 {\mu}m
bands. Our observations clearly show the presence of a coma and a tail in the
4.5 {\mu}m but not in the 3.6 {\mu}m band, which is consistent with molecular
band emission from CO2. Thermal modeling of the combined photometric data on
Don Quixote reveals a diameter of 18.4 (-0.4/+0.3) km and an albedo of 0.03
(-0.01/+0.02), which confirms Don Quixote to be the third-largest known NEO. We
derive an upper limit on the dust production rate of 1.9 kg s^-1 and derive a
CO2 gas production rate of (1.1+-0.1)10^26 molecules s^-1. Spitzer IRS
spectroscopic observations indicate the presence of fine-grained silicates,
perhaps pyroxene rich, on the surface of Don Quixote. Our discovery suggests
that CO2 can be present in near-Earth space over a long time. The presence of
CO2 might also explain that Don Quixote's cometary nature remained hidden for
nearly three decades.Comment: 40 pages, 8 figures, accepted by Ap
Recommended from our members
Multiple material systems for selective beam sintering
A method and apparatus for selectively sintering a layer of powder to produce a part comprising a plurality of sintered layers. The apparatus includes a computer controlling a laser to direct the laser energy onto the powder to produce a sintered mass. The computer either determines or is programmed with the boundaries of the desired cross-sectional regions of the part. For each cross-section, the aim of the laser beam is scanned over a layer of powder and the beam is switched on to sinter only the powder within the boundaries of the cross-section. Powder is applied and successive layers sintered until a completed part is formed. Preferably, the powder comprises a plurality of materials having different dissociation or bonding temperatures. The powder preferably comprises blended or coated materials.Board of Regents, University of Texas Syste
- …